Today i want to introduce a little bandwith measure tool to you. iperfis a tool to measure the bandwith between to systems. It is a client/server application, so you need to install it on both sides. To install this little guy, i use the standard repository from the system iam working on. On a RHEL you need to add the epel-repo to the machines. On ubuntu or debian you would probably use
1
sudo apt-get install iperf
After you have installed it on both sides, you have to start the server on one side. You could do it like that
1
2
3
iperf -s
# if you want to use another port
iperf -s -p 12345
Now you should see something like that (i used the standardport in this example)
1
2
3
4
5
[root@weichert ~] # iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
On the other side you connect with iperf to the server and start the test. With the parameter -r you start a bidirectional test. With -P 5 you will open 5 parallel client threads. The parameter -w will change the tcp window size. Okay let’s have a look on a simple test with iperf.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
# Start the test on clientside
[root@test-vm ~] # iperf -c weichert.it -P 5
------------------------------------------------------------
Client connecting to weichert.it, TCP port 5001
TCP window size: 2.50 MByte (default)
------------------------------------------------------------
[ 7] local 85.114.145.4 port 36718 connected with 85.114.145.4 port 12345
[ 3] local 85.114.145.4 port 36714 connected with 85.114.145.4 port 12345
[ 4] local 85.114.145.4 port 36715 connected with 85.114.145.4 port 12345
[ 5] local 85.114.145.4 port 36716 connected with 85.114.145.4 port 12345
[ 6] local 85.114.145.4 port 36717 connected with 85.114.145.4 port 12345
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 6.19 GBytes 5.34 Gbits/sec
[ 4] 0.0-10.0 sec 4.62 GBytes 3.98 Gbits/sec
[ 5] 0.0-10.0 sec 4.76 GBytes 4.11 Gbits/sec
[ 6] 0.0-10.0 sec 5.83 GBytes 5.03 Gbits/sec
[ 7] 0.0-10.0 sec 6.35 GBytes 5.46 Gbits/sec
[SUM] 0.0-10.0 sec 27.8 GBytes 23.8 Gbits/sec
# The server generate some similiar output
[root@weichert ~] # iperf -s
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[ 4] local 85.114.145.4 port 12345 connected with 85.114.145.4 port 36714
[ 5] local 85.114.145.4 port 12345 connected with 85.114.145.4 port 36715
[ 6] local 85.114.145.4 port 12345 connected with 85.114.145.4 port 36716
[ 7] local 85.114.145.4 port 12345 connected with 85.114.145.4 port 36717
[ 8] local 85.114.145.4 port 12345 connected with 85.114.145.4 port 36718
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-10.0 sec 6.19 GBytes 5.31 Gbits/sec
[ 5] 0.0-10.0 sec 4.62 GBytes 3.96 Gbits/sec
[ 7] 0.0-10.0 sec 5.83 GBytes 5.01 Gbits/sec
[ 6] 0.0-10.0 sec 4.76 GBytes 4.09 Gbits/sec
[ 8] 0.0-10.0 sec 6.35 GBytes 5.43 Gbits/sec
[SUM] 0.0-10.0 sec 27.8 GBytes 23.7 Gbits/sec
So far so good, but what if there is no iperf installed, or you cannot install it because of other restrictions? Take a look to dd. I wrote an short article to test bandwith with DD and/or Netcat.